Customisation Guidelines

Although it’s possible to change and mount files/folders into existing Docker images the recommended approach is to create new custom Docker images.

Installling AMPs also requires the creation of a custom image, this guide describes the steps required to install AMP files into Alfresco Content Repository and Alfresco Share images. These custom images can then be deployed using docker-compose.

This process requires some familiarty with Docker and specifically Dockerfile commands.

Setting Up

1. Clone this repository and change directory to acs-deployment

    git clone https://github.com/Alfresco/acs-deployment.git
    cd acs-deployment
   

2. Switch to the docker-compose directory, then create directories to hold AMP files and Dockerfiles

    cd docker-compose && \
    mkdir -p repository/amps share/share_amps && \
    touch repository/Dockerfile share/Dockerfile
   

3. Copy your Alfresco AMP files to the newly created repository/amps directory and copy your Share AMP files to the newly crated share/share_amps directory.

Create Custom Alfresco Content Repository Image

You will now need to install the AMP files into the Alfresco Content Repository image.

1. The docker-compose folder contains a file for each main code line of ACS, examine the relevant docker compose file for the version of ACS you want to apply the AMPs to. For example, to apply to the latest version of 7.3 take a look at the 7.3.N-docker-compose file

2. Take note of the image and tag being used for the alfresco service in the docker compose file you chose in the previous step. For example, if you are using 7.3.N-docker-compose.yml, you will find this on line 21 as follows:

    alfresco/alfresco-content-repository:7.3.0.1
   

3. Add the following Docker commands to the repository/Dockerfile file and save, making sure to change the image name and tag to match from the above step:

    FROM alfresco/alfresco-content-repository:7.3.0.1
   
    # Customize container: install amps
   
    ARG ALF_GROUP=Alfresco
    ARG TOMCAT_DIR=/usr/local/tomcat
   
    USER root
   
    ADD ./amps/*.amp ${TOMCAT_DIR}/amps/
   
    RUN java -jar ${TOMCAT_DIR}/alfresco-mmt/alfresco-mmt*.jar install \
        ${TOMCAT_DIR}/amps ${TOMCAT_DIR}/webapps/alfresco -directory -nobackup -verbose
   
    # Restore permissions
    RUN chgrp -R ${ALF_GROUP} ${TOMCAT_DIR}/webapps && \
        find ${TOMCAT_DIR}/webapps -type d -exec chmod 0750 {} \; && \
        find ${TOMCAT_DIR}/webapps -type f -exec chmod 0640 {} \; && \
        find ${TOMCAT_DIR}/shared -type d -exec chmod 0750 {} \; && \
        find ${TOMCAT_DIR}/shared -type f -exec chmod 0640 {} \; && \
        chmod -R g+r ${TOMCAT_DIR}/webapps && \
        chgrp -R ${ALF_GROUP} ${TOMCAT_DIR}
   
    USER alfresco
   

   NOTE: In the above example RUN docker command, alfresco-mmt jar is run with -directory, -nobackup and -verbose options. You must make sure these are suitable for your requirements. Documentation on alfresco-mmt can be found here.

4. Build the image, make sure you give the image an appropriate name and tag so you can easily identify the image afterwards. In the below example, you will want to replace myregistrydomain/my-custom-alfresco-content-repository:7.3.0.1 and myregistrydomain/my-custom-alfresco-content-repository:latest with your own Docker registry, image name and tag as per your requirements

    docker build repository -t myregistrydomain/my-custom-alfresco-content-repository:0.2.2.1 -t myregistrydomain/my-custom-alfresco-content-repository:latest
   

   Once the image build is complete, you should see successful messages similar to the below:

    Successfully built 632eda3ea296
    Successfully tagged myregistrydomain/my-custom-alfresco-content-repository:7.3.0.1
    Successfully tagged myregistrydomain/my-custom-alfresco-content-repository:latest
   

5. Replace the image used by the alfresco service in the docker-compose file you chose to use in step 1, for example, replace image: alfresco/alfresco-content-repository:7.3.0.1 with image: myregistrydomain/my-custom-alfresco-content-repository:7.3.0.1

6. Save the docker-compose file

Create Custom Alfresco Share Image

We will now repeat the process for the Alfresco Share image.

1. Take note of the image and tag being used for the share service in the docker compose file you chose in the previous section. For example, if you are using 7.3.N-docker-compose.yml, you will find this on line 102 as follows:

    alfresco/alfresco-share:7.3.0
   

2. Add the following Docker commands to the share/Dockerfile file and save, making sure to change the image name and tag to match from the above step:

    FROM alfresco/alfresco-share:7.3.0
   
    ARG TOMCAT_DIR=/usr/local/tomcat
   
    ADD ./share_amps/*.amp ${TOMCAT_DIR}/amps_share/
   
    RUN java -jar ${TOMCAT_DIR}/alfresco-mmt/alfresco-mmt*.jar install \
        ${TOMCAT_DIR}/amps_share ${TOMCAT_DIR}/webapps/share -directory -nobackup -verbose
   

   NOTE: In the above example RUN docker command, alfresco-mmt jar is run with -directory, -nobackup and -verbose options. You must make sure these are suitable for your requirements. Documentation on alfresco-mmt can be found here.

3. Build the image, make sure you give the image an appropriate name and tag so you can easily identify the image afterwards. In the below command, you will want to replace myregistrydomain/my-custom-alfresco-share:7.3.0 and myregistrydomain/my-custom-alfresco-share:latest with your own Docker registry, image name and tag as per your requirements

    docker build share -t myregistrydomain/my-custom-alfresco-share:7.3.0 -t myregistrydomain/my-custom-alfresco-share:latest
   

   Once the image build is complete, you should see successful messages similar to the below:

    Successfully built 6d5ee67935da
    Successfully tagged myregistrydomain/my-custom-alfresco-share:7.3.0
    Successfully tagged myregistrydomain/my-custom-alfresco-share:latest
   

4. Replace the image used by the share service in the docker-compose file you chose to use in the previous section, for example, replace image: alfresco/alfresco-share:7.3.0 with image: myregistrydomain/my-custom-alfresco-share:7.3.0

5. Save the docker-compose file

Start The System

You have now built two custom images (one for Alfresco Content Repository and one for Alfreso Share). These have been added to your docker-compose.yml services.

You can start your custom docker-compose.yml using the following command:

docker-compose -f <your-modified-docker-compose.yml> up

Further information on starting up or troubleshooting can be found here and a more advanced example of building a custom image with configuration can be found here.